ماژول میکروسوئیچ برخورد مکانیکی ویژه پرینترهای سه بعدی Mech Endstop v1.2
سایر ویژگیها:
- قرار گرفتن چهار جای پیچ برای نصب ساده و آسان
- استفاده از سیم مسی 22AWG
- قرار گرفتن چهار پین استاندارد
Mech Endstop v1.2
Description
The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin .100″ pitch header and accepts a standard, old-style CD-ROM audio connector cable.
Features
(1) Mechanical switches are less complicated to implement and cheaper than optical endstops. the function of endstops are to determine the original position of the extruder hot end, so it knows where to extrude the plastic material.
(2) The mechanical endstop is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum.
(3) We not just sell them, we also provide professional after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can.
Package Listing:
(1) Mechanical Endstops V1.2 x 3
(2) 4-Pin cable for endstop x 3
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.